64 Sporter Benchrest - The repeater for benchrest shooting

With the repeater 64 Sporter Benchrest ANSCHÜTZ now offers the friends of benchrest shooting a light rifle with utmost ANSCHÜTZ accuracy. The model 64 Sporter Benchrest is delivered in the cal. .22 l.r. with a 5-shot magazine. In the case of the 64 Sporter Benchrest it is also possible with the help of a single shot adapter to also use the rifle as a single loader as well.

The rifle is equipped with the rubber butt plate 4709 A. The backend, however, is prepared to attach the variably adjustable butt plate carrier with tilting column guide. In order to save weight and thus make the rifle suitable for the lower weight disciplines the flat forend was millcut on the bedding side. The ones who intend to use the rifle for the high weight disciplines are free, however, to use additional weights in these millcuts. The additional weights can also be used there to adjust the rifle to the individual balance preferences of the shooter.

To increase accuracy the target crown was subjected to a special treatment to reach perfect target groups. The rifle is equipped with a heavy barrel ANSCHÜTZ target barrel and fulfil all accuracy requirements. The receiver is drilled and tapped to take scope mounts for a telescopic sight.

At this model of the series Match 64 modifications were carried out in the area of the receiver. The external diameter was enlarged from 25 mm to 26 mm. This modification entails some advantages. The weight of the receiver was increased by 12 % which makes the barreled action more rigid. In addition the locking surface is enlarged by 15 % which leads to even more safety for the shooter when firing the shot. The new shape of the receiver will be continued in the firing pin nut which makes the system more elegant. In addition the old engraving on the upper side of the prism has been replaced by the more attractive „Wave-Style“.

Due to its versatile possibilities for additions and modifications this model is extraordinarily suitable to be used for benchrest shooting and in addition are available at a very favourable price.

Width of benchrest surface: 64 mm / 2.52"
Length of benchrest surface: 275 mm / 10.8"


 

	Walnut stock: Anatomically perfect lacquered walnut stock with stippled checkering.
	Rubber butt plate: The vertically adjustable rubber butt plate combined with the interchangeable spacers allow an individual adjustment of the length. The rubber butt plate fits the shoulder very well. No slip properties due to a special rubber composite and special pattern.
	ANSCHÜTZ heavy match barrel: Heavy cylindrical barrel with extraordinary shooting performance manufactured in the renowned ANSCHÜTZ special process which has been improved again and again.
	Match two stage trigger: Adjustable match two stage trigger with safety. The trigger blade is adjustable in length. The use in almost all disciplines is guaranteed by the various adjusting possibilities, especially the wide range of adjusting the weight. The trigger can be adjusted as two stage or single stage trigger. Match single stage trigger: The same as the match two stage trigger 5092, 5098 and 5101 but adjusted as a single stage trigger.
	Safety: Protects the trigger from inadvertent shot release.
	Clamping piece: Stock prepared for clamping piece with screws to attach aluminum butt plate carrier.