Dakota Longbow Tactical Rifle
Edited: 2009-11-15 16:03:37 | Category:
Waffen
The Longbow was developed
Longbow Tactical Rifle
|
|
 The Longbow was developed from the ground up at the request of one of the world's more sophisticated governments, seeking a tactical military rifle of unprecedented accuracy, power and flexibility. Based on Dakota Arms' renowned Model 76 hunting action, the Longbow offers range and power vastly superior to .30 tactical rifles, without the weight and bulk of .50 weapons.
The Longbow guarantees 1/2 MOA performance with an effective range of 1500 meters in its .338 configuration. It generates up to 5250 ft. lbs. of muzzle energy from a 300 grain bullet traveling at 2850 fps. The rifle is available in .338 Lapua magnum, .330 Dakota magnum, and .300 Dakota magnum. It utilizes commercially available match grade ammunition and components.
| Specifications |
| Size/Weight |
Length: 50" to 51 1/2"
Weight: 13.7 Pounds without scope |
| Calibers Available |
.338 Lapua Magnum
.300 Dakota Magnum
.330 Dakota Magnum |
| Action |
· Machined high strength steel alloy square bottom action
· Blind magazine
· Dakota Arms 76-style 3-position firing pin block safety
· Controlled round feeding
· Single round feeding
· Dakota Arms 76-style bolt release
· Matte Finish
· Claw extraction system
· Positive Mechanical Ejector
· Model 70 style trigger (will not seize from dirt or freeze in rain)
· 2.5 lb. trigger pull
· Picatinny one-piece optical rail, secured with 8-40 screws |
| Stock |
· Ergonomic, ambidextrous A-2 McMillan Fiberglass stock, black or olive drab green
· Full length action bedding
· 1 1/2" adjustable length of pull, from 12 7/8" to 14 3/8"
· Adjustable cheekpiece
· 3 sling swivel studs
· Bipod spike in forend |
| Barrel |
· High integrity LW-50 stainless steel (proprietary to Lothar Walthar)
· 28" .950 at muzzle
· High efficiency tuned muzzlebrake |
| Deployment Kit |
· One Case: double wall, lockable, airline approved, 53 1/2" x 14 1/4" x 4 5/8"
· One front bipod spike
· OPERATORS TOOL KIT:
1 torque wrench 65 in-lbs.
1 3/16 allen head socket (for installing action screws)
1 1/2" hex socket (for installing scope rings)
1 1/2" combination wrench (for removing scope)
1 3/32" allen wrench for scope rings
1 5/32" allen wrench for front guard screws
1 3/16" allen wrench for action screws
1 tool kit box |
|
|
For comments you must log in!
Comments
Nobody has made a comment to this article yet. Be the first!
