Blaser F3 Balancer-System
Focus on Balance The patented Blaser balance optimisation system consists of two components: * The stock balancer is a threaded rod with two weight cylinders replacing the normal stock nut in the stock. It can be implemented without a weight cylinder, with one or two weight cylinders. Fitted as standard for all Competition models, optional extra for all other models. * The barrel balancer allows you to increase the total weight up to 213 grams. This option is available for all Competition models.
The balancer system allows for individual adjustment of the weight distribution. It enables you to compensate for the following variable factors:
- variations in the wood density
- weight differences due to diverse lengths of pull
- weight of the adjustable comb (optional)
- weight of the adjustable recoil pad (optional)
Triplex Bore Design
Triplex stands for the ideal combination of three design characteristics: high muzzle velocity, a moderate recoil and a homogenous shot pattern. It is achieved by the interplay of special design features:
- Innovative, extremely flat forcing cone with an angle of 2,5°: The shot passes into the cylindrical barrel as smooth as possible: with minimal deformation and without any dangerous increase in pressure
- "Overbore" bore diameter of .733” (18,6 mm)
- 12 ga (3”) with magnum proofing and additional steel proofing
IBS® – Inertial Block System
Igniting Thoughts
- 3 lbs trigger pull out of the box
- Unique crisp and clean trigger characteristics
- Inline system of striker and firing pin: best possible use of kinetic energy and lightning fast ignition
- Pure mechanical, selective single trigger function independent from recoil
- Handy selector placed in front of trigger for simple barrel selection
- Trigger blade is continuously (step free) adjustable in length and ergonomically optimised regarding direction of force from the trigger finger. The trigger is designed to ensure that the trigger finger automatically aligns to the correct angle
- All parts of the action are designed to withstand maximum stress
EBS®–Ejection Ball System
Smooth Operator
- At the moment of firing the strikers not only hit the firing pins, they simultaneously hit the ejector pins in the system. They activate the ball system function in the ejectors for the upper and lower barrel
- While the gun is in storage, the ejector springs remain tension free so that spring fatigue is impossible
- The resistance when closing remains the same, no matter if the ejectors have been used before or not
- The extremely soft closing of the gun enables you to focus your concentration on nothing else but the shot
Combi Safety
Reliable Partnership
In the past decades Blaser has set new safety standards in shotgun and rifle technology: Blaser safety systems think ahead, anticipate operating mistakes and protect sportsman and companion in the best possible way – even when unexpected incidents occur. The F3 Safety combines trigger safety with an innovative safety striker catch system: In the event of a sear breaking, knock or a fall the hammer is caught – no matter if the safety is engaged or not.
The resistance of the entire F3 lock up system has been optimised with the Finite-Elemtens-Methode (FEM). The superior quality of its mechanical parts is as uncompromising as ist design. Ultramodern, computer-controlled heat treatment processes such as the nitrocarburisation of the F3 action achieve outstanding resistance characteristics.
Visierschienen
F3 Game Competition, F3 Competition Sporting und F3 Competition Trap
- Serienmäßig: 10,5 mm breit, zur Mündung hin verjüngend auf 8,5 mm
- Optional: parallele Schiene (gleichbleibende Breite) wahlweise 8,5 oder 10,5 mm breit
F3 Game
- Serienmäßig: Parallele Schiene (gleichbleibende Breite) 8,5 mm breit mit Perlkorn
- Optional: 10,5 mm breit, zur Mündung hin verjüngend auf 8,5 mm mit Perlkorn
A = Schaftlängen (gemessen bei Abzug in Mittelstellung)
B = Senkung
C = Pitch
 |
 |
F3 Game Hinterschaft
A 370 mm (serienmäßig)
Schaftlängen von 345 – 390 mm gegen Aufpreis
B1/B2 40/55 mm (serienmäßig)
B1/B2 35/50 mm auf Wunsch (ohne Aufpreis)
 |
F3 Sporting Hinterschaft
A 370 mm (serienmäßig)
Schaftlängen von 345 – 390 mm gegen Aufpreis
B1/B2 40/55 mm (serienmäßig)
B1/B2 38/50 mm auf Wunsch (ohne Aufpreis)
B1/B2 36/48 mm auf Wunsch (ohne Aufpreis)
 |
F3 Trap Hinterschaft
A 370 mm (serienmäßig).
Schaftlängen kürzer als 370 mm gegen Aufpreis,
länger als 370 mm mit verstellbarer Schaftkappe (optional)
B1/B2 32/42 mm
 |
F3 Monte Carlo Hinterschaft
A 370 mm (serienmäßig).
Schaftlängen kürzer als 370 mm gegen Aufpreis,
länger als 370 mm mit verstellbarer Schaftkappe (optional)
B1/B2 38/38/50 mm
 |
F3 Monte Carlo Hinterschaft hoch
A 370 mm (serienmäßig).
Schaftlängen kürzer als 370 mm gegen Aufpreis,
länger als 370 mm mit verstellbarer Schaftkappe (optional)
B1/B2 34/34/50 mm
Blaser Product Configurator
 |
Compose your own Blaser with a few mouse-clicks with the Blaser product configurator.
Blaser offers the Configurator for the R93 bolt-action rifle and the F3 shotgun.
Just try it, its easy.
Models with Hand-Engravings
|
Every Blaser rifle or shotgun in the grades Super-Luxus, Exclusive, Super-Exclusive and Imperial is a custom-made unique piece - the possibilities would go beyond the scope of this configurator. You will find detailed information about these grades under Blaser Exclusive or enjoy great examples of custom-made engravings in our Gallery of Engravings. |
The balancer system allows for individual adjustment of the weight distribution. It enables you to compensate for the following variable factors:
- variations in the wood density
- weight differences due to diverse lengths of pull
- weight of the adjustable comb (optional)
- weight of the adjustable recoil pad (optional)
Triplex Bore Design
Triplex stands for the ideal combination of three design characteristics: high muzzle velocity, a moderate recoil and a homogenous shot pattern. It is achieved by the interplay of special design features:
- Innovative, extremely flat forcing cone with an angle of 2,5°: The shot passes into the cylindrical barrel as smooth as possible: with minimal deformation and without any dangerous increase in pressure
- "Overbore" bore diameter of .733” (18,6 mm)
- 12 ga (3”) with magnum proofing and additional steel proofing
IBS® – Inertial Block System
Igniting Thoughts
- 3 lbs trigger pull out of the box
- Unique crisp and clean trigger characteristics
- Inline system of striker and firing pin: best possible use of kinetic energy and lightning fast ignition
- Pure mechanical, selective single trigger function independent from recoil
- Handy selector placed in front of trigger for simple barrel selection
- Trigger blade is continuously (step free) adjustable in length and ergonomically optimised regarding direction of force from the trigger finger. The trigger is designed to ensure that the trigger finger automatically aligns to the correct angle
- All parts of the action are designed to withstand maximum stress
EBS®–Ejection Ball System
Smooth Operator
- At the moment of firing the strikers not only hit the firing pins, they simultaneously hit the ejector pins in the system. They activate the ball system function in the ejectors for the upper and lower barrel
- While the gun is in storage, the ejector springs remain tension free so that spring fatigue is impossible
- The resistance when closing remains the same, no matter if the ejectors have been used before or not
- The extremely soft closing of the gun enables you to focus your concentration on nothing else but the shot
Combi Safety
Reliable Partnership
In the past decades Blaser has set new safety standards in shotgun and rifle technology: Blaser safety systems think ahead, anticipate operating mistakes and protect sportsman and companion in the best possible way – even when unexpected incidents occur. The F3 Safety combines trigger safety with an innovative safety striker catch system: In the event of a sear breaking, knock or a fall the hammer is caught – no matter if the safety is engaged or not.
The resistance of the entire F3 lock up system has been optimised with the Finite-Elemtens-Methode (FEM). The superior quality of its mechanical parts is as uncompromising as ist design. Ultramodern, computer-controlled heat treatment processes such as the nitrocarburisation of the F3 action achieve outstanding resistance characteristics.
Visierschienen
F3 Game Competition, F3 Competition Sporting und F3 Competition Trap
- Serienmäßig: 10,5 mm breit, zur Mündung hin verjüngend auf 8,5 mm
- Optional: parallele Schiene (gleichbleibende Breite) wahlweise 8,5 oder 10,5 mm breit
F3 Game
- Serienmäßig: Parallele Schiene (gleichbleibende Breite) 8,5 mm breit mit Perlkorn
- Optional: 10,5 mm breit, zur Mündung hin verjüngend auf 8,5 mm mit Perlkorn
A = Schaftlängen (gemessen bei Abzug in Mittelstellung)
B = Senkung
C = Pitch
|
|
F3 Game Hinterschaft
A 370 mm (serienmäßig)
Schaftlängen von 345 – 390 mm gegen Aufpreis
B1/B2 40/55 mm (serienmäßig)
B1/B2 35/50 mm auf Wunsch (ohne Aufpreis)
|
F3 Sporting Hinterschaft
A 370 mm (serienmäßig)
Schaftlängen von 345 – 390 mm gegen Aufpreis
B1/B2 40/55 mm (serienmäßig)
B1/B2 38/50 mm auf Wunsch (ohne Aufpreis)
B1/B2 36/48 mm auf Wunsch (ohne Aufpreis)
|
F3 Trap Hinterschaft
A 370 mm (serienmäßig).
Schaftlängen kürzer als 370 mm gegen Aufpreis,
länger als 370 mm mit verstellbarer Schaftkappe (optional)
B1/B2 32/42 mm
|
F3 Monte Carlo Hinterschaft
A 370 mm (serienmäßig).
Schaftlängen kürzer als 370 mm gegen Aufpreis,
länger als 370 mm mit verstellbarer Schaftkappe (optional)
B1/B2 38/38/50 mm
|
F3 Monte Carlo Hinterschaft hoch
A 370 mm (serienmäßig).
Schaftlängen kürzer als 370 mm gegen Aufpreis,
länger als 370 mm mit verstellbarer Schaftkappe (optional)
B1/B2 34/34/50 mm
Blaser Product Configurator
|
Compose your own Blaser with a few mouse-clicks with the Blaser product configurator.
Blaser offers the Configurator for the R93 bolt-action rifle and the F3 shotgun.
Just try it, its easy.
Models with Hand-Engravings
|
Every Blaser rifle or shotgun in the grades Super-Luxus, Exclusive, Super-Exclusive and Imperial is a custom-made unique piece - the possibilities would go beyond the scope of this configurator. You will find detailed information about these grades under Blaser Exclusive or enjoy great examples of custom-made engravings in our Gallery of Engravings. |
